Tel: 0161 643 8484

SSS4000/FR Floor recessed slab urinal

Ref. Code: SSS4000/FR

Made to order

Call for Price
0161 643 8484

SSS4000/FR Floor recessed slab urinal

Double click on above image to view full picture

Zoom Out
Zoom In


Stainless steel slab urinal for traditional floor recessed installation. This method of fixing requires the floor to be excavated to accommodate urinal trough, or it may be fitted at floor level by constructing a raised step of slip resistant fluted tiles. Suitable for toilet areas which are hosed down. Makes it ideal for replacement of traditional fireclay slabs.


1050 x 280 x Lmm (Length to order)

Standard sizes include:

  • 600mm
  • 900mm
  • 1200mm
  • 1500mm
  • 1800mm
  • 2100mm
  • 2400mm
  • 3000mm

Can also be made in any individual length as required, up to a maximum of 3600mm.

Manufactured from 16 gauge 304 grade stainless steel in a one piece construction and polished to a SATIN finish.

Available in standard and non standard lengths up to a maximum of 3600mm in one piece.

50mm BSP outlet with grated waste fitting at ‘L’ left or ‘R’ right hand end.

Supplied with wall fixing ends or free standing ends (as illustrated).

Supplied with plastic auto cisterns as standard (stainless steel ones are available if requested).

Urinals can be supplied with a standard stainless steel downpipe and sparge pipes or with TOP/BACK inlet vandal resistant sparge pipe cover

Additional Information

Technical information The urinals are produced as a one piece unit without joints from 304 grade 16 gauge stainless steel polished to a satin finish. During construction the requisite fall is built into the channel and the back of the urinal is designed to ensure an efficient spread of flushing water without splashing and drips.

Flushing equipment Urinals are supplied with plastic heavy duty automatic cisterns, capacities 4.5 - 13.5 litre, stainless steel downpipes, spargepipes for exposed or concealed spargepipe covers for ducted installations. Cisterns are supplied based on 4.5 litres per 600m of urinal.

Downpipes Manufactured from polished stainless steel tube to suit cistern and complete with wall clips.

Spargepipes Manufactured from polished stainless steel tube and complete with connecting tee for downpipe - fitted along urinal back - exposed installation.

Spreader buttons Manufactured from chrome plated brass with extended connections for through wall installation - concealed installation.

Concealed spargepipes Available at an additonal charge TOP or BACK inlet stainless steel VANDAL RESISTANT concealed spargepipe covers are available with perforated edges to ensure adequate flushing of the urinal back and to eliminate splashing. Covers are secured by the use of thief resistant socket button head security screws.

Outlets Urinals are fitted with 50mm BSP domeshaped grated waste outlet. Up to 3600mm - outlet either end. Over 3600mm - outlet each end.

Ends Slab urinals are supplied with integral wall fixing ends or free standing exposed ends. Trough urinals are supplied with panelled ends which are suitable for wall fixing or free standing.

Installation As the urinal is of a one piece construction it is easily installed. When installing, the top of the unit must be horizontal and ends vertical.

Related Products

Saville Stainless Limited - Registered In England - Unit 1, Greengate, Middleton Junction, Manchester M24 1RU - Registration No. 8967089 - Tel No. 0161 643 8484 - Email: