Stainless steel wall recessed (for recessing into cavity walls or wash room cubicles where design permits) combined NON TOUCH electronic automatic washstation providing the following TRIPLE functions.
- LIQUID SOAP
- WATER SUPPLY
- WARM AIR HAND DRYING
The sensor operated unit automatically dispenses a measured amount of liquid soap. Following a short time delay to allow user to lather hands, a measured amount of pre mixed or cold water is dispensed. Hand drying is provided by the integral warm air hand dryer. The washstation is an ideal vandal resistant, energy saving solution for space conscious washrooms.
REQUIREMENTS FOR INSTALLATION
- Mains electricity supply rated at 220/240 volts 50hz ac.
- 15mm copper cold water supply pipe.
- 32mm diameter plastic waste pipe.
SPECIFICATION - HAND DRYER & INTERNAL WATER HEATER
Motor -240 volt brushless
Timer - sensor operated
Sound level - 62 dB (A) at 1 metre
Element dryer - 1.3 kw at 240 volts
Element water - 2.8 kw at 240 volts
- Option 1 - is for use with a pre-mixed water supply - pressure 1-7bar (up to a 100psi).
- Option 2 - is supplied with an internal electrically operated water heater (mains water supply required) to provide the temperature controlled water needed per washing cycle.
overall = 422 x 815mm
recess = 395 x 790 x 102mm
Minor specifications are subject to change without notice.